Art of Murder Cards of Destiny

Can I get some help? I'm working on disarming the bomb that is located in the old factory. I'm a little comfused about the screwdriver tip. I'm trying to undo the screws on this bomb and I'm suppose to use sthe file point on these everytime I go to put the round file on the regular screwdriver head it's no working.I looked closely at the screwdriver and it turns but, it won't attach to the round file. Is there a place that attaches them...Thanks in advance.

Do this: In inventory, look close at screwdriver. Use all 3 files (only 2 are actually used) on screwdriver to change the point.

Then save your game.

Now you have a round tip screwdriver. Verify this by checking the name-label of that screwdriver.

Then - Use the screwdriver with round tip on each of the 4 screws.

Thanks MaG I'll try this

Hi MaG I managed to get the round file on the head of the screwdriver but, after I spray the bomb with the fire extinguisher and go for the screws she says The plate is screwed. What does that mean? What else needs to be done. Something else I notice reading the WT it says to use the extinguisher on the blinking white mercury sensor at top of the cover but, I have no blinking light it's just the green button on the bottom...Thanks

I think it means that you still have not removed the 4 screws from the plate.
Use the screwdriver with round tip on each of the 4 screws.

MaG is it possible for a save on this I appreciate this I hate getting blown up. Thanks

KAren,

I do not have a saved game on this part. The closest saved game I have is after the interrogation.
If you want that tell me.
Check the walkthrough to see how much will be skipped in the game.

No Thanks MaG I'll try to figure this out I must be doing something wrong. I Notice in the WT there is a blinking white mercury sensor at top of cover I don't have that on my screen could this be something the screwdrive just won't undo the screws. I don't know. Any other ideas. Thanks..

I have a save here real close to getting by the bomb. It's on XP, I will send if you can't get by. You can e-mail me.
Charllotte

Thanks for the help. I'll try it once more and see. Will XP work on windows 7?

Hi,

Save sent I don't know about Win7. But worth a try. The way I got through was one step at a time and save every bit of the way that it would let me.

Charllotte

Thanks, Charllotte.

Karen.

I took a picture of the seed on the microscope,and I analyze it with the wrapper I made a print of both but, I only have in inventor the plant occurrence area not the compoany office locations.Can I track back and get this as a print.? I went to the map in Nicolles office and when I placed the print on the map she says nothing is happening. I think I need the office locations to place on the map too.
Any ideas. Thanks in advance.

I think you can - go back and get the second map.

Don't you print when you are at the database user screen?

If you're asking about the map board - I believe there is a light switch at bottom left of that map board that you need to click on first.

Thanks MaG I'll go see what I can do.

Keep us posted, Karen.