BS3 Crystals

O.k., now what am I doing wrong?? (Or not doing??)

I got the machine together and the energy is just aflowin away, got all the crystals pointed in the right direction, I thought, with the beam pointing at or maybe slightly above the hulking machine, but the machine doesn't move and the panel isn't exposed. Wonder why not, pleze??

Thanks....

waves

You have to target the machine straight on --- to either pull it or push it depending on whether your laser flow is coming or going <g>

There are 2 alcoves that should be opened behind the machine.
One you need to push the machine, this action will cover the other alcove. So this time you change the crystal flow to hit the machine (by the wall now) again but this time you have to reverse the flow of the laser to pull it away. This will then allow access to both alcoves.