Have fun with the game, Chief!

hello,
may I please have a saved game with instructions on how to install the save into the game itself for just after the attack of the monkeys part 2.
thank you.
kathy

Kathy,

I apologize if I forgot to send you a saved game earlier. I can't remember.

The saved game is on the way.

Hello.
thats ok.
the saved game worked, thanks.
kathy

Good. Have fun.

I am playing Mysterious island 2. I am really stuck on the panel in the conrol room. I have done all that is needed to open the handles to level gas and water, I see the sound Mr X gives but no matter which of the 4 buttons I push . I cannot find a match, I have tried ALL the walkthroughs. They are good but not enough detail, Can you help?

I'm in the last leg of the game when I need to use the mixer. I've done everything I'm supposed to; I have the eyepiece back where its supposed to be, repaired the little violet bulb, blew a new bulb and added the magenta smoke, and clicked the little red button to clear the previous sample. I got the blood sample from Jep but when I go to put it onto the mixer Mina still says that the previous sample needs to be cleared. Pushing the red button does nothing. I've tried reloading games and everything else I can think of. Would anyone be willing to send me a save game right after that spot? Or when the blood sample is successfully on the mixer? Thank you!!

dolodave,

Are you talking about this panel?


if so:
1. The green buttons are not to be pushed. They light up when you do the levers correctly.
2. Move one of the levers to the top.
3. Then slowly move the other lever to get the gauge at green area.
Check the rising blue line at the center - you want that maintained at the green area.
Once it is in the green area, move the lever slowly until all 4 lights are on.



Aderes,



Double check:
1. You have all 5 spherical capacitors installed - see the 5 bulbs that Jep caught that Slugger threw at him.
2. You have repaired and installed the fuse - that is at right of the 5 spherical capacitors.
3. That you have placed the violot bulb UNDER the setup.
4. That you filled up the clear bulb with magenta glass and installed it on one end of the setup.

I'm at the saw mill and trying to cut the poles. I have the saw blade on and the nail, but when I move the pole, I have no idea how long it will be. Where is the lever to find out the length of the poles?

It is to the right of the blade.

I am at the Inlet and can't find the "pointed stick" to use to get the termites.

Please help.

Thank You

MaG

I didn't put two and two together and didn't use the 5 spherical capacitors. Thank you so much!

Great, Aderes. Hope you enjoy the ending.

Alan,
The pointed stick is the branch take by Jep on the path going down to the beach where the laser is. Just pass the broken robot.
Jep should chew it to make a pointed stick and the leaves when chewed becomes the sponge.

I have looked and looked but can't find it.

I "think" I had it but used it to make fire. The game will not let me get the fire back so that I might disassemble it.

Could you please send me a saved game with the termites on the stick as I am stumped.

Thank you

Al

Al,

I sent you the closest I have. They just got through the cemetery and at the the cliff.
It has the pointed stick.

i seem to have lost my sponge, i need it to soak up the oil so i can open the hatch, i tried to get passed the painter monkey so i could see if it got stolen but no luck, what do i do now?

See if you can pour palm oil on the hinge.

palm oil worked, thanks

Great - better see if I added that to the walkthrough.

hello,
I am a little confused, I am at the geothermal motor. I did the test with the voice. I have the twisted crystal holder. The alian door is closed and I lowered the levers at the bottom of the control panel to the bottom. but where is the water duct that I am to enter.
thanks
kathy

You go through the door with the alien script and then turn to the volcano at right of that tunnel.

To open the door - be sure that the levers are at the very bottom and that you have closed the lid of the levers in the control panel.