|
Re: Monitor and Gameboomers
[Re: Terri824]
#779699
01/08/12 08:05 PM
01/08/12 08:05 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Ok, disk done, in drive of HP. I haven't a clue what to do. I am now stuck and don't know how to get out of this. No matter what button I hit, it just sits here. I am now stuck in something that has Login, Info, Delete , Toggle saving, Clear, Save Close. I knew this was going to be a challenge but this might just be too much of a challenge for this ol gal I think I'm done. Thanks
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#779720
01/08/12 11:59 PM
01/08/12 11:59 PM
|
Joined: Oct 2000
Posts: 40,644 southeast USA
Jenny100
GB Reviewer Glitches Moderator
|
GB Reviewer Glitches Moderator
Sonic Boomer
Joined: Oct 2000
Posts: 40,644
southeast USA
|
I'm not sure I understand. Did you boot off the CD? The only reason to look at the CD from Windows is to make sure it burned correctly and that you see the Linux files. To actually use the CD you should boot off of it. Is your HP set to boot off the CD if there is one in the drive? Some HP computers have a boot menu you can access by pressing the F12 key when you first start the computer. Instructions ***here***. If your computer is set to boot off the CD, you may still get a message to "Press any key to boot from CD" and you have to press a key or it will boot from the hard drive. Once you boot Knoppix from the CD you should have a Desktop that looks something like ***this***.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#779792
01/09/12 11:37 AM
01/09/12 11:37 AM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Jenny I got nothing like that. I got directions on how to use the cursor and it was both visual and audio. I had the pc on, put the disk in the drive (E) and restarted the pc. I had never booted from a CD, thought that was the way to do it. This maybe too much for me to handle. I never considered myself the brightest crayola in the box, but this is ridiculous. I turned the pc on this morning and got VGA no signal but the desktop came up. Also couldn't turn the monitor off last night, got message "power button lockout". I know this is very frustrating for you, has to be, so if you don't think you want to continue to help me, or at least try to, I will understand. Thanks, Terri Got the power button lockout resolved.
Last edited by Terri824; 01/09/12 12:47 PM.
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#779811
01/09/12 01:25 PM
01/09/12 01:25 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Tried it again, restarting and had cd inserted in drive. What I got before was this: Adriane # 0-14, o, press enter for help, 1 www, 2 email, 3chat, 4 sms, 5 multimedia, 6 contacts, 7 notebook, 8 calculator, 9 text scanner, 10 file manager, 11 shell, 12 graphical programs, 13 setup, 14 shutdown. My boot menu button is "esc". I'm wondering if it's my disk that I made or if it's me. I tried again it gave me two choices to boot from, I selected first one this time and it went into the same thing again with the list of 14 items. When all of this is done correctly, does it give you a read out of the results/problems?
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#779849
01/09/12 03:43 PM
01/09/12 03:43 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Now I'm a bit confused. If I used ADRIANE-KNOPPIX-v6.7.1CD 2011-09-14EN.iso, shouldn't they be the same? I hoped it was the same so that you would know exactly what I'm looking at. Perhaps I d/l the wrong one. It took about 30 min to do but don't mind re-doing if I need to. Forget the confused part. I have seen the error of my way. I chose one that was different and will now try to redo this. I am finding that I don't pay the best attention to details.
Last edited by Terri824; 01/09/12 04:02 PM.
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#779871
01/09/12 05:29 PM
01/09/12 05:29 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
When I get the KNOPPIX 6.7 image (blue, white and black) what do I do next? There is an image in the upper left and some icons on a tool bar at the lower left. Forgot to mention, I burned another disk.
Last edited by Terri824; 01/09/12 06:44 PM.
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780012
01/10/12 11:00 AM
01/10/12 11:00 AM
|
Joined: Aug 2002
Posts: 7,263 Arizona
InlandAZ
BAAG Specialist
|
BAAG Specialist
Joined: Aug 2002
Posts: 7,263
Arizona
|
Several months back I replaced the video card (nVidia GeForce 9100)with a Zotac GeForce Gt220. It never did show anything about a Zotac video card anywhere on the pc though. Terri As Jenny stated, you should see a GeForce GT220 Display Adapter. If you don't, I'm suspecting that the BIOS needs to be modified. There is an option to disable on-board graphics (at least in version 7) on the Advanced Tab under Device Options - It looks like this HP BIOS Screen Make sure yours states Disabled.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780022
01/10/12 12:30 PM
01/10/12 12:30 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Ok, presently I am in GB on my other pc using Iceweasel, so I've gotten that far. Under graphics it is showing nVidia 9100. Now, I've clicked on several files..system tools, graphics, appearance and I can't do anything with the files, what am I doing wrong? For the bios, will I have to reboot and go into bios when the pc starts again? I love the way the page breaks apart when you click on the X......that's too cool! Yesterday when I let it sit idle, the pc froze up and I had to manually shut it down.
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780027
01/10/12 01:41 PM
01/10/12 01:41 PM
|
Joined: Oct 2000
Posts: 40,644 southeast USA
Jenny100
GB Reviewer Glitches Moderator
|
GB Reviewer Glitches Moderator
Sonic Boomer
Joined: Oct 2000
Posts: 40,644
southeast USA
|
You have to reboot to get into the BIOS and change the settings. The BIOS is not part of either Windows or Linux. Yesterday when I let it sit idle, the pc froze up and I had to manually shut it down. Was that when you were booted to Knoppix or when you were booted to Windows?
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780028
01/10/12 01:52 PM
01/10/12 01:52 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Booted to Linux. It was the first time that I got onto the blue, white, black screen and I waited hoping to get an answer as what to do next, so left it idle and it froze. I need to remove the disk before I boot into the bios, right? Can you give me a clue what I am looking for once in there?
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780029
01/10/12 02:06 PM
01/10/12 02:06 PM
|
Joined: Oct 2000
Posts: 40,644 southeast USA
Jenny100
GB Reviewer Glitches Moderator
|
GB Reviewer Glitches Moderator
Sonic Boomer
Joined: Oct 2000
Posts: 40,644
southeast USA
|
Booted to Linux. It was the first time that I got onto the blue, white, black screen and I waited hoping to get an answer as what to do next, so left it idle and it froze. That's a hardware problem then. I need to remove the disk before I boot into the bios, right? It doesn't really matter, since you should access the BIOS before the computer starts to boot from the hard drive. The BIOS is stored in a chip on the motherboard, not on the hard drive. Can you give me a clue what I am looking for once in there? Inland gave you a link to a picture of the setting in his last post. ***link to picture of HP BIOS onboard graphics setting***You probably need to navigate the BIOS with the keyboard arrows, Enter key, Escape key, etc. The BIOS will list any other keys you need to use. However I don't think changing the graphics setting will help with your freezing problem.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780101
01/10/12 09:37 PM
01/10/12 09:37 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
InlandAZ.I'm embarassed to say that I have no idea what that is. My daughter plugged everything back in after she installed the new video card.
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780108
01/10/12 10:05 PM
01/10/12 10:05 PM
|
Joined: Jun 2005
Posts: 22,399 Near St. Louis, MO
Draclvr
Reviews Editor - Hints/Glitches Mod - Site Support
|
Reviews Editor - Hints/Glitches Mod - Site Support
True Blue Boomer
Joined: Jun 2005
Posts: 22,399
Near St. Louis, MO
|
Inland means, are you sure the monitor is plugged into the new video card and not the old motherboard graphics?
When life gives you tomatoes, make Bloody Marys.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780111
01/10/12 10:51 PM
01/10/12 10:51 PM
|
Joined: Aug 2002
Posts: 7,263 Arizona
InlandAZ
BAAG Specialist
|
BAAG Specialist
Joined: Aug 2002
Posts: 7,263
Arizona
|
According to your Service Manual (Check the Removing/Replacing an Add-In card section) you have three horizontal slots just below the PSU fan. Is your cable plugged in to one of them?
Last edited by InlandAZ; 01/10/12 10:56 PM.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780197
01/11/12 09:35 AM
01/11/12 09:35 AM
|
Joined: Oct 2000
Posts: 40,644 southeast USA
Jenny100
GB Reviewer Glitches Moderator
|
GB Reviewer Glitches Moderator
Sonic Boomer
Joined: Oct 2000
Posts: 40,644
southeast USA
|
Here's a picture of the back of a computer, showing the connections: ***Back of a computer***The red arrow points to the connection for the onboard graphics. The green arrow points to the connection for the video card. In this example, the computer's onboard graphics have a VGA connection, and the video card has two DVI connections, but your video card may have a VGA connection and a DVI connection instead of two DVI connections. The important thing to notice is where the connections are. The onboard graphics is higher up, where other connections to the motherboard are -- while the connection on the graphics card is further down, where add-in cards are located.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780236
01/11/12 12:00 PM
01/11/12 12:00 PM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Where do you guys find these tutorials/explanations? Presently everything is connected at the bottom of the pc, gettig DVI active, VGA not active. Last night my daughter checked out the situation. I think she did plug something into the top and we got no signal. We have decided to take another look at the v/card, be sure it is still secure etc. Also went into device adapters, clicked on nVidia, it shows GeForce 9100 and can be disabled from there. One mention, I ran the Smart Extended Self test, just because I could, and it passed, so guess hard drive is ok. You guys are so kind to help me. Thanks, Terri
When you live in the past, it costs you the present.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780241
01/11/12 12:39 PM
01/11/12 12:39 PM
|
Joined: Aug 2002
Posts: 7,263 Arizona
InlandAZ
BAAG Specialist
|
BAAG Specialist
Joined: Aug 2002
Posts: 7,263
Arizona
|
Where do you guys find these tutorials/explanations? Presently everything is connected at the bottom of the pc, gettig DVI active, VGA not active. Last night my daughter checked out the situation. I think she did plug something into the top and we got no signal. We have decided to take another look at the v/card, be sure it is still secure etc. Also went into device adapters, clicked on nVidia, it shows GeForce 9100 and can be disabled from there. One mention, I ran the Smart Extended Self test, just because I could, and it passed, so guess hard drive is ok. You guys are so kind to help me. Thanks, Terri Verify the BIOS has the on-board adapter disabled.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780265
01/11/12 03:14 PM
01/11/12 03:14 PM
|
Joined: Jun 2005
Posts: 22,399 Near St. Louis, MO
Draclvr
Reviews Editor - Hints/Glitches Mod - Site Support
|
Reviews Editor - Hints/Glitches Mod - Site Support
True Blue Boomer
Joined: Jun 2005
Posts: 22,399
Near St. Louis, MO
|
Plus, according to the link to the Service Manual for this computer that Inland posted, the new graphics card will be in one of the upper 3 horizontal slots just below the CPU fan. All the lower connections on this computer are on the motherboard.
So, Terri, if your monitor is plugged into the bottom, it is not plugged into your new graphics card. Look up at the top of the back for another set of connections for a monitor. That will be where you plug your monitor into the new graphics card. That must have been where your daughter plugged in the monitor and you got no signal.
Click on Inland's link; let the PDF file open up and then scroll down to Removing and Replacing an Add-in Card and look at picture #4. That shows the 3 slots available for an add in card. That's where your new video card should be and that's where you monitor should be plugged in.
And definitely be sure the motherboard graphics are disabled in the BIOS.
When life gives you tomatoes, make Bloody Marys.
|
|
|
Re: Monitor and Gameboomers
[Re: Terri824]
#780450
01/12/12 11:08 AM
01/12/12 11:08 AM
|
Joined: Jan 2006
Posts: 1,923 Texas
Terri824
OP
Addicted Boomer
|
OP
Addicted Boomer
Joined: Jan 2006
Posts: 1,923
Texas
|
Yesterday I took a break from the pc. When I turned it on, it was on, then off, then on, then off. I could hear it cycling. Blue light was on, yellow/orange light was not but when I tried to open the CD drive it opened. Next....originally I don't know how we had the monitor hooked up. Christmas my daughter's husband redid things and I think he changed it to the bottom of the pc.( white to white, blue to blue) On the back of the monitor there are two cords, one blue, one white. Are they both to be in the horizontial (yellow) positions on the back of the pc?
When you live in the past, it costs you the present.
|
|
|
|
|